Communications support modules
Hardware - SIMADYN D 6-9
Edition 12.2004
6
6.1.2.1 Application information and noise immunity
• Operation without fans possible
• The communication modules are screwed to the PC board of CS8! The
cut-outs of the covers supplied, must be adapted to the connector
dimensions of the communication modules.
• The cover is mounted between the CS8 and the communications
module.
• Free slots must be covered with complete covers.
• Noise-immune operation is only possible if they are screwed into the
subrack
For additional information on EMC and the ambient conditions, refer to
Section "General technical data“!
Other information
To Next Page
Loading...
