Program memory modules / Interface modules
8-4 Hardware - SIMADYN D
Edition 04.2011
8.2 Interface module SE13.1
6DD1681-0BD1
The interface module is used to adapt passive signals via voltage divider
and T elements. It includes
• 6 T elements which can be connected/configured using solder pins,
and
• 2 voltage dividers which can be freely configured
• housing for snapping-on to mounting rail
• 3-row, 3 x 16-pin terminal block
• 6 configurable T elements
• 2 voltage dividers with spindle potentiometers which can be freely
dimensioned
• solder pins to connect components with axially-located connections
• labeling field for the user to identify his plant/system
ZO
ZE ZA
ZM
Input Outpu
GND
Screen
Fig. 8-1 Connecting the T element on the interface module
Order No.
Description
Module design
T element
To Next Page
Loading...
