Input/output modules
Hardware - SIMADYN D 5-37
Edition 12.2004
5
5.4.4 Connector assignment X8
Connector X8 (50 pin, sub D) connects the signals for:
• 2*8 binary inputs and 2*8 binary outputs
• 4 trigger signals for integrating analog inputs
The assignment of the 16 binary inputs and outputs corresponds to those of
IT41, connector X7.
5.4.4.1 Connector assignment X8 for SC49
IT42
X8
Significance SU10
at SC49,
cable end
A
Connector
designation when
configuring
1 Binary output 1 1
34 Binary output 2 2
18 Binary output 3 3
2 Binary output 4 4
35 Binary output 5 5 X8A
19 Binary output 6 6
3 Binary output 7 7
36 Binary output 8 8
20 External P24 voltage 9
4 External ground 10
37 Binary output 9 11
21 Binary output 10 12
5 Binary output 11 13
38 Binary output 12 14
22 Binary output 13 15 X8B
6 Binary output 14 16
39 Binary output 15 17
23 Binary output 16 18
7 External P24 voltage 19
40 External ground 20
24 Binary input 1 21
8 Binary input 2 22
41 Binary input 3 23 X8C
25 Binary input 4 24
9 Binary input 5 25
Table 5-30 SU10 terminal assignment for SC49, cable end A
SU10 terminal
assignment at
SC49, end A
To Next Page
Loading...
Need help?
General
