General technical data
Hardware - SIMADYN D 1-17
Edition 08.2005
1
1.2.4 Transporting modules
Modules and components may only be stored and transported in
conductive packing materials (e. g. metallized plastic boxes, metal
containers).
If the packaging is not conductive, then the modules must first be
wrapped in conductive packaging materials. This can include, for
example conductive foam rubber or normal household aluminum foil.
The necessary ESD protective measures are clearly shown in the
following diagram.
a = conductive flooring surface
d = ESD coat/jacket
b = ESD desk = ESD chain
c = ESD shoes
f = grounding connection for the cabinets
To Next Page
Loading...
