Technology subrack
7-2 Hardware - SIMADYN D
Edition 03.2001
7.1 Technology subrack SRT400
6DD1682-0CG0
The subrack SRT400 has 2 slots to accept
• 1 or 2 technology modules T400
• SIMOVERT MASTER DRIVES communication modules
− CB1 (PROFIBUS-DP)
− CB2 (CAN)
− SCB1 (binary and analog inputs/outputs connected to SCI1/2 via fiber-
optic cable)
− SCB2 (USS, Peer-to-Peer)
• input voltage: 115 / 230 V
• output voltage:
− + 5 V, +/- 15 V for modules
− 24 V DC for binary inputs/outputs
• metal housing, closed at all sides
• wall mounting
7.2 Technology module T400
7.2.1 General features
6DD1606-0AD0
The technology module T400 has a range of comprehensive peripheral
functions (inputs/outputs) on the module. This allows it to be used by itself to
realize favorably-priced smaller applications for drives and controls. It
represents an innovated T300.
As far as the backplane bus and module format, it is designed as option
module for use in the SIMOVERT MASTER DRIVES 6SE70/71 (FC, SC)
drive converters.
A high-performance coupling to the basic control module of MASTER
DRIVES („BASE BOARD“ CU) is established via its dual port RAM.
Further it can also be used in the SRT400 subrack(„Technology Box“).
Here, it can be used together with a second T400 or a MASTER DRIVES
communications module („COM BOARD“).
It is configured on a Windows 95-PC with SIMATIC STEP7 (HWConfig) and
CFC.
Order No.
Description
Features
Order No.
Description
To Next Page
Loading...
