Program memory modules / Interface modules
Hardware - SIMADYN D 8-41
Edition 04.2011
8
8.9 Interface modules SU10, SU11, SU12, SU13
SU10 6DD1681-0FG0
SU11 6DD1681-0EA1
SU12 6DD1681-0AJ1
SU13 6DD1681-0GK0
SU10 SU11 SU12 SU13
The interface module
SU10 is a
26-pin
terminal block.
This is used to code
analog or binary signals
of a
26 pin
ribbon cable
connector (SIMADYN D
side) on screw/plug-in
terminals (plant/system
side).
The interface module
SU11 is a
20-pin
terminal block.
This is used to code
analog or binary signals
of a
20 pin
ribbon cable
connector (SIMADYN D
side) on screw/plug-in
terminals (plant/system
side).
The interface module
SU12 is a
10-pin
terminal block.
This is used to code
analog or binary signals
of a
10 pin
ribbon cable
connector (SIMADYN D
side) on screw/plug-in
terminals (plant/system
side).
The interface module
SU12 is a
10-pin
terminal block.
This is used to code
50 signals of a
50pin
sub-D socket
connector (SIMADYN D
side) on screw/plug-in
terminals (plant/system
side).
SU10 26 screw/plug-in terminals (X2)
• 25 screw terminal connections for plant/system side analog or
binary signals
• 1 unassigned screw terminal connection
26 core ribbon cable X1
SU11 24 screw/plug-in terminals (X2)
• 20 screw terminal connections for plant/system side analog or
binary signals
• 4 unassigned screw terminal connections
20 core ribbon cable for connector X1
SU12 16 screw/plug-in terminals (X2)
• 10 screw terminal connections for plant/system side analog or
binary signals
• 6 unassigned screw terminal connections
10 core ribbon cable for connector X1.
ribbon cable, 10-core SIMADYN D-side analog- and binary signals
SU13 50 screw/plug-in terminals (X2)
• 50 signals are connected
• no electronic conversion
50 core screened round cable for connector X1.
Order No.
General
Module design
To Next Page
Loading...
Need help?
General
