Program memory modules / Interface modules
Hardware - SIMADYN D 8-31
Edition 04.2011
8
8.7.2 Application information
The interface module can be mounted both vertically and horizontally
Further information on EMC and ambient conditions, refer to Section
„General technical data“
A typical application is illustrated in the following diagram:
SIMADYN D side
Plant/system side
Interface
module SB70
Fig. 8-13 Application example for interface module SB70 at binary input-, output module
EB11
The binary inputs of the interface module are connected to the SIMADYN
D outputs via ribbon cables (refer to the Chapter Plug in cables).
Other information
To Next Page
