Program memory modules / Interface modules
8-20 Hardware - SIMADYN D
Edition 04.2011
8.5.4 Connector assignment
To connect the interface module to the SIMADYN D / SIMATIC TDC
components use cable SC62 or SC64 (for further informations see the
documentation of the SIMADYN D / SIMATIC TDC components).
Terminal 120 V Channel No.
11
21
31
41
51
61
71
81
Reference
Reference
Reference
Reference
Reference
Reference
Reference
Reference
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
Channel 6
Channel 7
Channel 8
12
22
32
42
52
62
72
82
120 V-input
120 V-Input
120 V-Input
120 V-Input
120 V-Input
120 V-Input
120 V-Input
120 V-Input
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
Channel 6
Channel 7
Channel 8
14
24
34
44
54
64
74
84
nc
nc
nc
nc
nc
nc
nc
nc
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
Channel 6
Channel 7
Channel 8
Table 8-5 Assignment of the binary inputs of interface module SB60
The minimun conductor cross section for the terminal block X2 is
0,2mm², the maximum conductor cross section is 2,5 mm².
flat connector X1
Binary inputs,
terminal block X2
Conductor cross
section
To Next Page
Loading...
