CPU module
3-12
Hardware - SIMADYN D
Edition 03.2001
The program is loaded in a program memory module
• MS5 2 Mbyte Flash-EPROM, 8 Kbyte EEPROM
• MS51 4 Mbyte Flash-EPROM, 8 Kbyte EEPROM
• MS52 8 MByte Flash-EPROM, 8 KByte EEPROM
An RS 232 interface (V.24) with service protocol DUST 1 with 19.2 kbaud is
permanently installed in connector X01 (9-pin sub-D socket). It is used to:
• test and commission the user program (using CFC or "basic IBS")
• loading the user program from the PC (only in this module)
8 binary inputs can be connected at the 10-pin connector X5.
The screw terminals for the binary inputs are available via the interface
modules (can be connected using cable SC7):
Interface module Function
SB10, SU10 Electrical 1:1 connection
SB60, SB61 With electrical isolation (floating) and signal conversion
Table 3-7 Possible interface modules for PM6
MS5, MS51, MS52
Serial service
interface
Binary inputs
Interface modules
To Next Page
Loading...
Need help?
General
