Contents
xxiii
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
12-17 SIMATIC S7 Format: Measuring Range Type J in
°
C and
°
F 12-12........
12-18 SIMATIC S7 Format: Measuring range type K in
°
C and
°
F 12-13.........
12-19 SIMATIC S7 Format: Measuring Range Type L in
°
C and
°
F 12-13........
12-20 SIMATIC S7 Format: Measuring Range Type N in
°
C and
°
F 12-14.......
12-21 SIMATIC S7 Format: Measuring Range Type R, S in
°
C and
°
F 12-14.....
12-22 SIMATIC S7 Format: Measuring Range Type T in
°
C and
°
F 12-15.......
12-23 SIMATIC S7 format: Output ranges
5V;
10 V ;
20 mA 12-16........
12-24 SIMATIC S7 Format: Output ranges 1 to 5 V; 4 to 20 mA 12-16..........
12-25 Compensation of the Reference Junction Temperature 12-21............
12-26 Reference Junction Parameters 12-24................................
12-27 Dependence of the Input and Output Values on the Operating State
of the PLC (CPU of the DP Master)
and the Power Supply Voltage L + 12-27.............................
12-28 Response of the Analog Modules, Depending
on the Location of the Analog Input Value in the Range of Values 12-28..
12-29 Response of the Analog Modules, Depending on the Location
of the Analog Output Value in the Range of Values 12-28...............
12-30 Parameters for analog input modules U, I ST 12-29....................
12-31 Parameters for analog input modules U, I High Feature 12-30............
12-32 Parameters for analog input modules U, I High Speed 12-31............
12-33 Parameters R TD, TC analog electronic modules 12-32..................
12-34 Parameters for 2AI RTD High Feature analog electronic module 12-34....
12-35 Parameters for analog output modules U, I 12-38......................
12-36 Terminal assignment of the 2AI U Standard 12-42......................
12-37 Terminal assignment of the 2AI U High Feature 12-46...................
12-38 Terminal assignment of the 2AI U High Speed 12-50...................
12-39 Terminal assignment of the 2AI I 2WIRE Standard 12-54...............
12-40 Terminal assignment of the 4AI I 2WIRE Standard 12-58...............
12-41 Terminal assignment of the 2AI I 2WIRE High Speed 12-62.............
12-42 Terminal assignment of the 2AI I 4WIRE Standard 12-67................
12-43 Terminal assignment of the 2AI I 2/4WIRE High Feature 12-70..........
12-44 Terminal assignment of the 2AI I 4WIRE High Speed 12-75..............
12-45 Terminal assignment of the 2AI RTD Standard 12-79...................
12-46 Terminal assignment of the 2AI RTD High Feature 12-83...............
12-47 Terminal assignment of the 2AI TC Standard 12-90....................
12-48 Terminal assignment of the 2AI TC High Feature 12-95.................
12-49 Terminal assignment of the 2AO U Standard 12-100.....................
12-50 Terminal assignment of the 2AO U High Feature 12-104..................
12-51 Terminal assignment of the 2AO I Standard 12-107......................
12-52 Terminal assignment of the 2AO I High Feature 12-111..................
13-1 Parameters for 4 IQ-SENSE 13-3...................................
13-2 Standard feedback interface 13-10...................................
13-3 Enhanced feedback interface 13-10..................................
13-4 Enhanced control interface 13-12....................................
13-5 Terminal assignment of the 4 IQ-SENSE 13-15........................
A-1 Interface module order numbers A-1................................
A-2 Terminal module order numbers A-2...............................
A-3 Power module order numbers A-3..................................
A-4 Digital electronic module order numbers A-3........................
A-5 Analog electronic module order numbers A-5........................
A-6 Process-related module order numbers A-5.........................
A-7 Reserve module order numbers A-6................................
A-8 ET 200S accessories order numbers A-6...........................
A-9 Network components (PROFIBUS DP) for ET 200S order numbers A-7.
A-10 Network components (PROFINET I/O) for ET 200S order numbers A-8.
To Next Page
Loading...
