Siemens SIMATIC ET 200S - D; E

Index
Index-4
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
D
Definition
of electromagnetic compatibility, 7-6
station status, 6-31
Degree of protection IP20, 7-10
Diagnostics, 6-1, 6-25, 6-66
Diagnostics using LEDs, 6-12, 6-61
Digital electronic module error types, 6-40
Digital electronic modules, 6-14, 11-1
Digital input modules, 6-4
Digital output modules, 6-4
Dimension Drawings, B-1
Distributed I/O systems -area of application,
1-1
DO 24 VDC/0.5 A High Feature digital
electronic module, 11-52
DP-master, 1-2
DP-slave, 1-2
E
Electromagnetic compatibility, 7-6
Electronic module, 1-8, 3-10, 5-27
changing type, 5-27
replacing, 5-27
Electronic modules, 3-14, 5-27
identifying, 5-24
inserting, 5-24
removing, 5-26
removing and inserting during operation,
5-28
Electronic modules and applications, 3-10
Electronics modules, 5-24, 5-26, 5-28, 9-2
Electrostatic discharge, 7-6
EM 1STEP 5V/204kHz, 6-17, 6-44
EMC, 7-6
EMERGENCY-OFF -equipment, 5-1
Emission of radio interference, 7-7
ET 200S, 5-3, 5-4, 5-5, 5-6, 6-2, 6-10, 6-57,
6-59
configuring, 6-2, 6-57
electrical design, 5-6
features and benefits, 1-10
operating on a grounded supply, 5-3
overall configuration, 5-5
with grounded reference potential, 5-4
ET 200S components, 1-7
ET 200S Distributed I/O System
area of application, 1-5
Definition, 1-5
Terminal- and Electronic Modules, 1-5
View , 1-6
Example configuration of a fiber--optic cable
network with the IM151--1 FO STANDARD,
3-9
Examples of ET 200S setups, 3-2
F
FB192, 6-26
Feedback interface, 3-41
Fiber optic-duplex line, 1-9
Fiber--optic cable
bending radius, 5-23
Order number, A-7
Finely--graduated modular system, 3-2
FM, Approval, 7-4
FOC, Cable lengths, 5-22
G
General rules, 5-1
General Technical Specifications, 7-1
Grounded supply, 5-3
Grouping, 3-5
GSD file, 6-58
GSD-file, 6-3
Guide, to the manual, vii
I
Identification data, 3-42
Identification for Australia, 7-4
IEC 204, 5-1
IEC 61131, 7-4
IEC 61784--1:2002 Ed1 CP 3/1, 1-2
IM151--1 BASIC/IM151--1
STANDARD/IM151--1 FO
STANDARD/IM151--1 HIGH FEATURE,
6-12
Status and error displays, 6-12
IM151--1 FO STANDARD, Plug adapters, 5-22
IM151--3 PN
Micro Memory Card, 8-26
Status and error displays, 6-61
Technical specifications, 8-25
Terminal assignment, 8-24
Updating the firmware, 8-28
IM151-3 PN interface module, 1-7
Implementation of a GSD file into the
engineering software, 6-3, 6-58