Siemens SINAMICS Series Equipment Manual

Motor Modules Booksize
4.2 Motor Modules with Internal Air Cooling
Equipment Manuel for Booksize Power Modules
4-2 Manual, (GH2), Edition 06.2005, 6SL3097-2AC00-0BP2
Characteristics of the motor modules:
• Single type from 3 A to 200 A
• Double type from 2x3 A to 2x18 A
• Internal/external air cooling
• Short-circuit/ground-fault-proof
• Integrated DC link and electronics current busbar connection
• Integrated "safe motor brake control"
• Electronic type plate
• Operating status and error status via LEDs
• DRIVE-CLiQ interface for communication with the control unit and/or other components in
the drive line-up.
– Integration in system diagnostics
4.2 4.2 Motor Modules with Internal Air Cooling
4.2.1 Description
A motor module is a power unit (inverter) that provides the power supply for the connected
motor(s). Power is supplied by means of the DC link of the drive unit. A motor module must
be connected to a control unit via DRIVE-CLiQ. The open-loop and closed-loop control
functions for the motor module are stored in the control unit.
One motor can be connected to single motor modules and two motors can be connected to
double motor modules.

Siemens SINAMICS Series Specifications

General

Product Line	SINAMICS
Cooling Method	Air-cooled, Liquid-cooled
Voltage Range	200 V to 690 V
Power Range	0.12kW - 250kW
Communication Interfaces	PROFINET, PROFIBUS, Ethernet
Control Modes	Vector control, V/f control
Protection Class	IP20
Type	Variable Frequency Drives (VFD)