Options
6.1 Shielded terminal plates
Equipment Manuel for Booksize Power Modules
6-12 Manual, (GH2), Edition 06.2005, 6SL3097-2AC00-0BP2
6.1.4 Installation
Table 6-1 Installing the shielded terminal plate on a 100 mm module (e.g. with internal air cooling)
Unscrew the screw with
screwdriver T25.
Hook in the shielded plate. Secure the shielded terminal
plate with screwdriver
T25/3 Nm.
The shielded terminal plate
is installed.
To Next Page
Loading...
