Siemens SINAMICS Series Equipment Manual

Line Connection Booksize
2.1 Introduction
Equipment Manuel for Booksize Power Modules
2-2 Manual, (GH2), Edition 06.2005, 6SL3097-2AC00-0BP2
Note
The limit values for the radio interference voltage are only observed when the line filter is
used (class A1 to EN 55011).
Caution
The following can occur if line filters are used that have not been approved for SINAMICS
by SIEMENS:
- The Line Modules may become damaged/faulty.
- Line reactions can occur that can damage or interfere with other loads powered from
the same network.

Siemens SINAMICS Series Specifications

General

Product Line	SINAMICS
Cooling Method	Air-cooled, Liquid-cooled
Voltage Range	200 V to 690 V
Power Range	0.12kW - 250kW
Communication Interfaces	PROFINET, PROFIBUS, Ethernet
Control Modes	Vector control, V/f control
Protection Class	IP20
Type	Variable Frequency Drives (VFD)