01/2007
11.2 Machine and setting data
11-290
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
Number Refer-
ence
NameIdentifier
9215 USER_CLASS_WRITE_SEA Write setting data
9218 USER_CLASS_SELECT_PROGRAM Program selection
9219 USER_CLASS_TEACH_IN TEACH IN
9220 USER_CLASS_PRESET PRESET
9221 USER_CLASS_CLEAR_RPA Deleting R parameters
9222 USER_CLASS_WRITE_RPA Write R parameters
9231 USER_CLASS_WRITE_RPA_1 Write protection for first RPA area
9232 USER_BEGIN_WRITE_RPA_1 Start of the first RPA area
9233 USER_END_WRITE_RPA_1 End of the first RPA area
9234 USER_CLASS_WRITE_RPA_2 Write protection for second RPA area
9235 USER_BEGIN_WRITE_RPA_2 Start of the second RPA area
9236 USER_END_WRITE_RPA_2 End of the second RPA area
9237 USER_CLASS_WRITE_RPA_3 Write protection for third RPA area
9238 USER_BEGIN_WRITE_RPA_3 Start of the third RPA area
9239 USER_END_WRITE_RPA_3 End of the third RPA area
9240 USER_CLASS_WRITE_TOA_NAME Change tool designation and duplo
9241 USER_CLASS_WRITE_TOA_TYPE Change tool type
9247 USER_CLASS_BASE_ZERO_OFF_PA Basic offset PA
9248 USER_CLASS_BASE_ZERO_OFF_MA Basic offset MA
References: /FB/ Description of Functions, Basic Functions:
A2 Various Interface Signals
Section: MMC machine data for protection levels
Individual data The protection level of individual machine and/or setting data can be modified in
the file SGUD.DEF.
Example:
The axial machine data item CTRLOUT_SEGMENT_NR requires protection
level 3 for reading and protection level 2 for writing.
Syntax:
REDEF $Machine data string APR n APW m
APR n: Defining the protection level for reading (R
ead) the data
APW m: Defining the protection level for writing (W
rite) the data
File SGUD.DEF:
%_N_SGUD_DEF
;$PATH=/_N_DEF_DIR
REDEF $MA_CTRLOUT_SEGMENT_NR APR 3 APW 2
M30
References: /PGA/ Programming Guide Advanced
Section: File and Program Management
Defining protection levels for user data (GUD)
11 NCK Commissionin
with HMI Advanced
To Next Page
Loading...
