SureTrack® & Repair Information Getting Started and Logging In
187
15.5.2 Logging In with New Authorization Code (active
account)
Use the following instructions, if you have purchased the current diagnostic tool
software upgrade and your SureTrack account is active (has not expired). To find
your new authorization code, see Finding your SureTrack Authorization Code on
page 192.
You must have the current software version installed on the diagnostic tool,
and a Wi-Fi Internet connection to use SureTrack.
1. Log in to SureTrack using your current username and password.
2. At the ShopKey Pro start page, select your username (Figure 15-8), then
select Profile Manager from the dropdown menu.
Figure 15-8
3. Log in to the Profile Manger (Figure 15-9) using your current username and
password.
4. Enter your new Authorization code (Figure 15-9).
Figure 15-9
5. Review and update the rest of your profile and make sure all required fields are
filled out.
6. Select Save.
7. Exit the Profile Manager by selecting your username (near the top right) and
select Logout.
8. When the login screen displays, login using your current username and
password.
9. Confirm the new expiration date by logging back into Profile Manger to check
it.
To Next Page
Loading...
Need help?
General
