ShopStream Update Tool (SST) Installing Software Updates
200
For SST program updates (only) - if you have the Automatic Update setting
”on”, the update will be installed automatically. See Automatic Update setting
in Basic Operation on page 197 for additional information.
If you have the Automatic Update setting “off”, the SST program must be
manually installed. See Installing Software Updates on page 200.
If the Internet connection is interrupted during a download, the download is
suspended and a “network unavailable” message displays. The message
disappears and the download resumes automatically once the Internet
connection is restored.
16.6 Installing Software Updates
When a software update is ready for installation, an installation update message will
appear (Figure 16-8). You can select the message or the SST icon from the system
tray at anytime to start the software update installation process.
Figure 16-8 Typical update installation message
If applicable, before installing a software update, have your Compact Scan
Module (CSM) and USB cable available. The software update may include
CSM firmware updates that need to be installed.
z To install a software update:
1. Select the software update available message (Figure 16-8), or the SST icon
from the system tray.
A software update installation window will display (Figure 16-9).
Figure 16-9 Typical update installation window
2. Select an installation option to continue:
– Install Now—starts the software update installation. Proceed to step 3.
– Install Later—closes the message. The message will reappear at a later
time as a reminder.
If Install Later is chosen, you can select the SST icon from the system tray to
restart the installation at anytime.
3. Close the ShopStream Diagnostic Suite application. The ShopStream
Diagnostic Suite should remain closed until the software installation has
completed.
4. Follow the on-screen instructions to complete the installation.
5. After the installation is complete, open the ShopStream Diagnostic Suite
application.
6. If applicable, select Scanner from the Home Screen. If a CSM firmware
update has been received, a “Compact Scan Module firmware update” message
will display. Proceed to Firmware Updates on page 39.
To Next Page
Loading...
