151
Section 10 Quick Lookups
Introduction
This section describes the basic operation and navigation of the
Quick Lookups function.
Selecting Quick Lookups opens a menu providing two options,
Oil Specs and Resets and TSBs.
Main Topic Links
• Oil Specs and Resets page 151
• TSBs (Technical Service Bulletins) page 153
• Tire and Wheel Service page 156
10.1 Oil Specs and Resets
Oil Specs and Resets provides up-to-date OEM information on your diagnostic tool,
via wireless network connection with our Snap-on Information Service. This feature
allows you to quickly access the following OEM information:
• Engine oil service reset procedures
• Engine oil specifications
In addition, you can perform engine oil service resets using the diagnostic tool (if
supported).
— Oil Specs and Resets coverage includes domestic and import cars,
light trucks, and vans. Coverage is limited to vehicles sold through
dealerships only in the United States.
— All vehicles may not have on-board diagnostic tool reset capabilities,
or information available.
— If you experience a wireless connection loss, the Oil Specs and Resets
function may stop. To continue use, you must re-establish your Internet
connection.
The information and procedures provided by the Oil Specs and Resets function is
vehicle specific, therefore a vehicle must be identified before information can be
displayed.
z Using the Oil Specs and Resets function
There are two methods to access this function:
• From the Home screen - select the Quick Lookups icon, then select the Oil
Specs and Resets menu option (Figure 10-1), then proceed to Step 1.
Figure 10-1
• From within a current Scanner session - select Oil Specs and Resets from
the Select System menu (Figure 10-2), then proceed to Step 3.
To Next Page
Loading...
Need help?
General
