General Information Windows (Applicable Features / Operations)
17
1.6.7 E-Mail Client Setup
The Data Manager function features an e-mail option that allows you to send a
saved data or image files as an e-mail attachment. To use this feature, you must
install an e-mail client, and then link your existing e-mail address to the client.
The following instructions are intended as a guide only, as e-mail client setup
procedures vary. See Email on page 167 for information on sending e-mails from
Data Manager.
z E-mail client installation and setup (Example):
1. Download an email client (e.g. eM Client) (Figure 1-9).
Figure 1-9
2. Install the software following the screen prompts (Figure 1-10).
Figure 1-10
The Data Manager e-mail feature uses the Windows system e-mail client.
3. Select “Use this client as default application” option when prompted. This sets
the client as the Windows system e-mail client.
4. Enter your e-mail information as required (Figure 1-11).
To Next Page
Loading...
