ShopStream Update Tool (SST) Manual Software Download
199
z To manually download software:
1. Select the SST icon in the system tray to open the menu (Figure 16-5).
Figure 16-5 ShopStream Update Tool icon and menu
2. Select Check for Updates from the menu.
A series of message boxes will display as the SST searches for updates
(Figure 16-6).
Figure 16-6 Typical - Checking for Updates message
Once the search is complete, one of two results are expected:
– If no updates are found, the message box closes and a “No updates
available” message displays.
– If updates are found, they will automatically begin to download (Figure 16-7).
To view the update status window (Figure 16-7), select Show Progress from the
SST icon menu (Figure 16-5).
Figure 16-7 Typical - Update status window
The percentage status bar may not always be displayed while downloading
(Figure 16-7).
3. During an active download, three options are available from the update status
window (Figure 16-7):
– Fast Download—selecting Fast Download provides the option to either
initiate a faster download, or continue downloading the background. If Fast
Download is selected, it may adversely affect diagnostic tool performance,
only choose if you are not actively using the Diagnostic Suite.
– Minimize—closes the message box. The download continues as a
background task and the diagnostic tool can be used normally.
– Cancel—stops and cancels the download and closes the message box. If
you select Cancel, and choose to re-start the download again, the download
will start from the beginning.
4. Once the download completes, it must be installed. See the applicable
instructions for Installing Software Updates on page 200 or Installing Software
Upgrades on page 201.
To Next Page
Loading...
Need help?
General
