Sony XVS Series - Virtual Image Cancelation; Interpolation Settings; Crop;Border Settings

124
Virtual Image Cancelation
If an extreme degree of perspective is set for an image, the
part of the image exceeding the virtual view point is
displayed wrapped around on the monitor screen. This is
referred to as a virtual image.
You can make a setting so as not to show the virtual
images.
1 In the M/E-1 >Key1 >Resizer menu (1115), press
[Resizer], turning it on.
2 In the <Resizer Effect/Rotation> group, press
[Rotation].
The Rotation menu (1115.5) appears.
3 Press [Wrap Around], turning it on.
Interpolation Settings
1 In the M/E-1 >Key1 >Resizer menu (1115), press
[Resizer], turning it on.
2 In the <Resizer Effect/Rotation> group, press [Resizer
Process].
The Resizer Process menu (1115.3) appears.
3 Select an interpolation method.
Set the interpolation settings in the same way as for the
DME interpolation settings.
For details, see “Interpolation Settings” (page 252).
Crop/Border Settings
Setting cropping
1 In the M/E-1 >Key1 >Resizer menu (1115), press
[Resizer], turning it on.
2 In the <Resizer Effect/Rotation> group, press [Border/
Crop].
The Border/Crop menu (1115.1) appears.
3 Press [Crop], turning it on.
4 Set the parameters.
Set the crop settings in the same way as for the DME
crop settings.
For details, see “Crop Settings” (page 209).
Enabling mosaic or defocus in the M/E-1 >Key1 >Resizer
>Enhanced Effect menu (1115.2) and selecting [Video/
Key] in the <Mosaic/Defocus Mode> group disables
cropping.
Setting the border
1 In the M/E-1 >Key1 >Resizer menu (1115), press
[Resizer], turning it on.
2 In the <Resizer Effect/Rotation> group, press [Border/
Crop].
The Border/Crop menu (1115.1) appears.
3 Press [Border], turning it on.
4 Set the following parameters.
To apply color to a border
1 In the <Border Mode> group, press [Flat Color].
2 Set the following parameters.
To soften the inner edge of a border
1 Press [Border Soft].
2 Set the following parameter.
To add a beveled light edge
1 In the <Border Mode> group, press [Beveled Light
Edge].
Note
No. Parameter Adjustment
1 H Simultaneously adjust border width
of left and right edges
2 V Simultaneously adjust border width
of top and bottom edges
3 All Simultaneously adjust border width
on all edges
4 Density Border density
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3Hue Hue
No. Parameter Adjustment
1 Inner Soft Softness of inner edge of border