Sony XVS Series - Key Priority Settings; Setting the Key Priority (Transition Control Block)

80
Key Priority Settings
If a number of keys are already inserted in the current
video, you can check or change the overlay sequence (key
priority).
When a key priority ([KEY PRIOR] button) is selected as
the next transition, you can also change the key priority
when switching to the new video.
The key priority values are from 1 to 4, with a higher
priority key being “in front” as seen on the screen.
You can set the key priority for keys inserted in the current
video and for keys after the transition.
The key priority setting can be set using either the [PRIOR
SET] button in the transition control block, or using the
Misc >Key Priority menu for the M/E or PGM/PST bank.
When the operating mode is set to multi program, the key
priority setting cannot be made.
Setting the Key Priority (Transition
Control Block)
Transition control block
Setting the key priority is not supported using the
transition control block (simple type).
Changing the key priority
Note
Priority 1
Priority 2
Priority 4
Priority 3
Note
KEY PRIOR button
PRIOR SET button
Next transition selection buttons
Key priority: 3, 1, 4, 2
Key priority: 1, 3, 4, 2
Select [KEY1].