Sony XVS Series - Sepia Settings; Mono Settings; Posterization;Solarization Settings; Nega Settings

221
Sepia Settings
Applying the Sepia effect
1 Open the DME >Video Modify >Color Modify menu
(4123).
2 Press [Sepia], turning it on.
3 Set the following parameters.
4 To set the color of the sepia image, press [Sepia
Color], and set the following parameters.
To mask the Sepia effect with a selected pattern
Press [Mask] to open the DME >Video Modify >Mask
menu (4127), and set the type of pattern and modifiers (see
page 224).
Mono Settings
Applying the Mono effect
1 Open the DME >Video Modify >Color Modify menu
(4123).
2 Press [Mono], turning it on.
To mask the Mono effect with a selected pattern
Press [Mask] to open the DME >Video Modify >Mask
menu (4127), and set the type of pattern and modifiers (see
page 224)
.
Posterization/Solarization Settings
Posterization allows you to specify the degree of
luminance coarsening.
Solarization allows you to specify the degree of
chrominance coarsening.
Applying the Posterization/Solarization
effect
1 Open the DME >Video Modify >Color Modify menu
(4123).
2 Press [Poster/Solar], turning it on.
3 Set the following parameters.
To mask the Posterization/Solarization effect with
a selected pattern
Press [Mask] to open the DME >Video Modify >Mask
menu (4127), and set the type of pattern and modifiers (see
page 224).
Nega Settings
Applying the Nega effect
1 Open the DME >Video Modify >Color Modify menu
(4123).
2 To invert the luminance, press [Nega Y], turning it on.
3 To invert the chrominance, press [Nega C], turning it
on.
To mask the Nega effect with a selected pattern
Press [Mask] to open the DME >Video Modify >Mask
menu (4127), and set the type of pattern and modifiers (see
page 224).
Contrast Settings
Applying the Contrast effect
1 Open the DME >Video Modify >Color Modify menu
(4123).
2 Press [Contrast], turning it on.
3 Set the following parameters.
No. Parameter Adjustment
1 Mix Y Luminance signal mix amount
2 Mix C Chrominance signal mix amount
3 Mix All Luminance signal and
chrominance signal mix amount
simultaneous adjustment
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3Hue Hue
No. Parameter Adjustment
1 Poster Coarseness of luminance
gradations (posterization
parameter)
2 Solar Coarseness of chrominance
gradations (solarization parameter)