325
Shotbox Register Editing
You can carry out the following editing on shotbox
registers.
• Lock: Write-protect the data contents of the register.
• Copy: Copy data between registers.
• Move: Move data between registers.
• Swap: Swap the contents of two registers.
• Delete: Delete the data contents of a register.
• Name: Attach a name to a register.
In the Shotbox menu, use the same procedure as when
editing an effect register.
However, it is not necessary to specify a region for shotbox
registers.
For details, see “Effect Register Editing” (page 305).
To Next Page
Loading...
