338
Macro Operations (Menu)
You can edit macro registers and macro events using the
following menus.
Macro Register Editing
In the Macro >Register menu, you can check the status and
edit macro registers.
For details about the status display, see “Effect Status
Display” (page 304). However, region names are not
displayed.
You can carry out the following editing on macro registers.
• Lock: Write-protect the data contents of the register.
• Copy: Copy data between registers.
• Delete: Delete the data contents of a register.
• Name: Attach a name to a register.
In the Macro >Register menu, use the same procedure as
when editing an effect register.
However, the region selection operation is not necessary
for macro registers.
For details, see “Effect Register Editing” (page 305).
Online Editing of Macro Events
You use the On Line Edit menu to carry out online editing
of macro events.
In the On Line Edit menu, you can check the control panel
operating sequence in the menu. You can also edit using
the control panel and menu.
To display the On Line Edit menu
1
Recall the macro register (1 to 250) you want to edit
using the control panel, and select macro editing
mode
1)
.
1) State with numeric keypad control block (see page 330), utility/
shotbox control block (see page 330), or Flexi Pad control block (see
page 335) switched to macro editing mode.
2
In any of the following menus, select the same register
recalled in step 1, and press [On Line Edit].
• Macro >Register >Lock menu (5412)
• Macro >Register >Delete menu (5416)
• Macro >Register >Rename menu (5417)
• File >Shotbox, Macro >Macro >File Edit menu
(7142.1)
The On Line Edit menu (7142.2) appears, and you can
now carry out online editing of the events for the
recalled register. Also, the control block of the control
panel operated in step 1 is assigned to control editing
operations.
In the following cases, [On Line Edit] is disabled and
it is not possible to display the On Line Edit menu.
• When the recalled register and the register selected
in the menu are different.
• When a device other than [Register] is selected in
the File >Shotbox, Macro >Macro >File Edit menu
(7142.1).
• If the recalled register is locked.
Menu Function Operations
Register menu
(macro register
editing)
Carry out macro
register editing.
• Locking a register
• Copying a
register
• Deleting a
register
• Naming a register
On Line Edit
menu
(online editing of
macro events)
Edit events in a
macro register,
using the control
panel and menus.
• Inserting an event
• Deleting an event
• Modifying an
event
Off Line Edit
menu
(offline editing of
macro events)
Edit events in a
macro register,
local drive, or
removable drive,
using the menus.
• Inserting an event
• Adding an event
• Deleting an event
• Creating a new
macro
Note
To Next Page
Loading...
