220
Applying Special Effects
(Effects on the Overall
Signal)
Defocus Settings
Applying the Defocus effect
1
Open the DME >Video Modify >Defocus/Blur menu
(4121).
2
Press [Defocus], turning it on.
3
In the <Defocus Mode> group, select the signal to
which to apply the defocus effect.
Video/Key: Video signal and key signal
Video: Video signal only
4
Set the following parameters.
When [Video/Key] is selected
When [Video] is selected
5
To cancel black level leaking that can occur at the edge
of the screen when the Defocus effect is enabled, press
[Clean Defocus], turning it on.
To mask the Defocus effect with a selected
pattern
Press [Mask] to open the DME >Video Modify >Mask
menu (4127), and set the type of pattern and modifiers (see
page 224).
Blur Settings
Applying the Blur effect
1
Open the DME >Video Modify >Defocus/Blur menu
(4121).
2
Press [Blur], turning it on.
3
Set the following parameters.
To mask the Blur effect with a selected pattern
Press [Mask] to open the DME >Video Modify >Mask
menu (4127), and set the type of pattern and modifiers (see
page 224).
Multi Move Settings
Applying the Multi Move effect
1
Open the DME >Video Modify >Multi Move menu
(4122).
2
Press [Multi Move], turning it on.
3
Set the following parameters.
a) When a minus value is specified, the picture is extended in the
vertical direction. When a plus value is specified, the picture is
extended in the horizontal direction.
No. Parameter Adjustment
1 H Simultaneous horizontal
defocusing of video and key signals
2 V Simultaneous vertical defocusing
of video and key signals
3 All Simultaneous horizontal and
vertical defocusing of video and
key signals
No. Parameter Adjustment
1 H Horizontal defocusing of video
signal
2 V Vertical defocusing of video signal
3 All Horizontal and vertical defocusing
of video signal
No. Parameter Adjustment
1 H Simultaneous horizontal blurring of
video and key signals
2 V Simultaneous vertical blurring of
video and key signals
3 All Simultaneous horizontal and
vertical blurring of video and key
signals
No. Parameter Adjustment
1 Center X X-value of shrinking center point
2 Center Y Y-value of shrinking center point
3 Size Scaling reduction ratio
4 Aspect Aspect ratio of scaled images
a)