Sony XVS Series

339
On Line Edit menu
a Register number
Shows the number of the register (1 to 250) being edited.
b Register name
Shows the name of the register being edited.
c Event number
Shows the current event number. When the [FROM TO]
button in the utility/shotbox control block is pressed to
select a range of events, this appears as a range, “From X
To Y.”
The event number reflects the position of the cursor in the
macro register creation list.
d Remaining Memory
Shows the percentage of memory still available for
recording events.
e Macro register creation list
When a macro is stored in the register, this shows a list of
the macro events. Each macro event consists of the
following components, which you can check in the list.
• Contents: Event statement, Continue statement, or
event number
• Symbol: Type of event (ASCII character string)
• Data: Event details in the form of parameters and data
For details about event components, see “Macro File
Editing Rules” (page 463).
The cursor indicates the current event in the list
(highlighted in reverse video). You can scroll the list using
the [No] parameter, but this does not change the cursor
position.
Depending on the switcher status, the cursor color changes
as follows.
• Yellow: In macro editing mode.
• Gray: When the editing mode is exited by a control
panel operation.
• Blue: During macro execution
f ALL button
Selects all events in the macro register creation list.
g Macro creation event list
Shows the event being created or executed in the control
panel.
h Insert Before button
Inserts a created event immediately before the selected
event in the macro register creation list.
i Insert After button
Inserts a created event immediately after the selected event
in the macro register creation list.
j Delete button
Deletes the selected event in the macro register creation
list.
k Modify button
Replaces the selected event in the macro register creation
list with a created event.
l <Prev button
Moves the cursor to the event immediately before the
selected event in the macro register creation list.
m >Next button
Moves the cursor to the event immediately after the
selected event in the macro register creation list.
a Register number
b Register name
c Event number
d Remaining
Memory
e Macro register creation list
f ALL button
g Macro creation event list
h Insert Before button
i Insert After button
j Delete button
k Modify button
l <Prev button
m >Next button