130
Recalling a key snapshot
1
Select the target key to operate using the key
delegation buttons.
2
Press the [K-SS] button.
The [K-SS] button lights amber, and the control block
switches to key snapshot operation mode.
3
Press the button ([K-SS 1] to [K-SS 4]) for the register
you want to recall.
The selected button is lit green, and the key snapshot
is recalled.
The recalled information varies depending on the
settings in the Snapshot >Key Snapshot >Attribute
menu (6351) (see page 315).
To cancel a key snapshot recall operation
Press the [UNDO] button.
To Next Page
