307
Copying data in effect registers
This applies to all regions.
1
In the Effect >Status menu (6200), select the copy
source register.
2
In the <Copy> group, press [From __].
3
Select the copy destination register.
4
In the <Copy> group, press [To __].
Deleting data from effect registers
This applies to all regions.
1
In the Effect >Status menu (6200), select the register.
2
Press [Delete].
Renaming an effect register
This applies to all regions.
1
In the Effect >Status menu (6200), select the register.
2
Press [Rename].
3
Enter a name of up to 8 characters in the keyboard
window, and press [Enter].
The following names cannot be used.
CON, PRN, AUX, CLOCK$, NUL
COM0, COM1, COM2, COM3, COM4, COM5,
COM6, COM7, COM8, COM9
LPT0, LPT1, LPT2, LPT3, LPT4, LPT5, LPT6, LPT7,
LPT8, LPT9
Note
To Next Page
Loading...
