Vista 5 M3 Digital Mixing System
5-142 AutoTouchPlus
Document generated: 28.08.13
SW V4.9
Vistonics Indicators The meaning of the different Vistonics indicators is as follows:
Displayed Value The displayed value (e.g. ‘–7.6 dB’) is always the current value, except when
the control is in TRIM mode. Then it shows the offset from TRIM null point.
It is underlined whenever the control is touched (‘hold’ in automation).
Rotary Value Current and replay value of the rotary control. If the current value is different
from the one within the last mix pass, a pink-colored element indicates the
value of the last mix pass, while the main display is indicating the current
value.
Fader Value Current and replay value of the fader. If the current value is different from
the one in the last mix pass, a pink colored element indicates the value within
the last mix pass, while the main display is indicating the current value.
Recording Recording and recording mode indicator: This always refers to the associated
control.
Characters without a frame indicate the status of the rotary control (I = Isolate,
R = Read, T = Trim, W = Write).
A red frame behind the W or T indicates that the rotary control is currently
recording.
To Next Page
