Studer Vista 5 M3 - Page 564

Vista 5 M3 Digital Mixing System
4 Meterbridge Installation
Document generated: 07.10.13
Configuration and System Start
1. ForcorrectoperationoftheTFTmeters,openthe D950system.ini file
andadd HasTFTMeters=Yes inthe [d950systeminfo] area.
2. Copythe VistaMonitor shortcutintothestartupfolder.
  Oncethisisdone,theVista5M3canbestartedasusual(describedinthe
manual).Themeterbridgewillautomaticallystartupwiththeconsole.
         