Studer Vista 5 M3 - Page 563

Vista 5 M3 Digital Mixing System
Meterbridge Installation 3
Document generated: 07.10.13
Electrical: DSP Core with Dual Bridge Cards
1. Wirethesystemaccordingtothediagrambelow.
2. Connectthemainscableattachedtothemeterbridgetothemainsoutletat
theconsole’srearside.
Meterbridge PC,
Primary LAN –
Desk Switch (1 m)
Meterbridge Switch
– Meterbridge PC,
Secondary LAN (0.6 m)
Desk Switch –
Core Bridge Card,
Primary (Control)
Meterbridge Switch –
Redundant
Core Bridge Card,
Secondary (Control)
Desk PC, Secondary LAN – Meterbridge Switch (1 m)
Cat5 Ethernet Connection
Cat5 MADI Connection
DVI Connection
Power-On Connection
SCore Live Frame with Redundant Bridge Card
VISTA 5 M3 Desk with Meterbridge Option, Rear Side
GC DVI Signal – Meterbridge (1.8 m)
Power-On Link, Desk –
Meterbridge PC (0.7 m)
Main & Redundant
Bridge Cards
Cat5 MADI Connection,
Desk – Core (Monitoring)
Desk PC,
Primary LAN
– Desk PC,
(0.3 m)
IP Addresses
Device IP Address
Desk PC, Primary LAN 192.168.1.128
Desk PC, Secondary LAN 192.168.2.128
(Desk PC, Auxiliary LAN
requires an optional network card)
(DHCP or as required)
Meter Bridge PC, Primary LAN 192.168.1.129
Meter Bridge PC, Secondary LAN 192.168.2.129
Main Bridge Card, Primary 192.168.1.60
Redundant Bridge Card, Secondary 192.168.2.60