Hardware Configuration Guide
SSU-2000 Configuration Chart
238 SSU-2000 User’s Guide 12713020-002-2 Revision D – April 2004
26. SSU I/O Adapter Panel,
DS1 120/75 Ω Balun
Outputs, Siemens
1.6/5.6 mm connectors
22013068-002-0
1. One adapter required per Output module
(or redundant pair of Output modules).
2. Requires separate I/O cable, 50 pin
SCSI – see item
30.
3. Optional ears for 21-inch or 23-inch rack.
27. SSU I/O Adapter Panel,
DS1 120/75 Ω Balun
Outputs, Siemens
1.0/2.3 mm connectors
22013068-003-0
1. One adapter required per Output module
(or redundant pair of Output modules).
2. Requires separate I/O cable, 50 pin
SCSI – see item
30.
3.
Optional ears for 21-inch or 23-inch rack.
28. I/O Adapter Assembly,
9-pin D Outputs (DE9)
22013067-001-0 1. One adapter required per DS1 Output
module (or redundant pair Output
modules).
2. Requires separate I/O cable, 50
pin-SCSI – see item
30.
3. Optional ears for 21-inch or 23-inch rack.
29. Adapter, 9-pin to
wire-wrap
22013085-000-0 One DE9 I/O connector to wire-wrap
adapter for each DE9 I/O connector
(optional).
30. I/O Cable, 50 pin 1 m
I/O Cable, 50 pin 1.1 m
I/O Cable, 50 pin 1.2 m
I/O Cable, 50 pin 1.3 m
I/O Cable, 50 pin 1.4 m
I/O Cable, 50 pin 1.5 m
I/O Cable, 50 pin 1.6 m
I/O Cable, 50 pin 1.7 m
I/O Cable, 50 pin 1.8 m
I/O Cable, 50 pin 1.9 m
I/O Cable, 50 pin 2 m
805SCSI-0050
805SCSI-0150
805SCSI-0250
805SCSI-0350
805SCSI-0450
805SCSI-0550
805SCSI-0650
805SCSI-0750
805SCSI-0850
805SCSI-0950
805SCSI-2050
1. One cable (1 to 2 meters in length)
required for each Output module or
redundant pair of Output modules in the
system.
2. Same cables used for Main shelf and
Expansion shelf.
31. 805SCSI-TELCO
Cable, 50-pin
SCSI to 50-pin
TELCO connector
32. 805SCSI-TLCOR
Cable, 50-pin
SCSI, to 50-pin
TELCO connector
right angle
Table 9-3. SSU-2000 System Components (Continued)
Item Description Part Number Notes
To Next Page
Loading...
Need help?
General
