12713020-002-2 Revision D – April 2004 SSU-2000 User’s Guide 351
Interactive Command Set
MSG
Use this command to access the messaging facilities.
Level 0 Not applicable
Level 1 Not applicable
Level 2
MSG “message to send”
Use this command to broadcast a message on all active
communication sessions. The maximum length of each message is
60 characters.
Level 3 Same as Level 2 operation
Level 4 Same as Level 3 operation
Remarks The string must be entered
Related None
Restrictions None
Note: The MSG is implemented as an event. It displays a full
message in an autonomous event. But, it only saves 20 characters in
the event log when a user tries to query it later.
To Next Page
Loading...
Need help?
General
