Interactive Command Set
358 SSU-2000 User’s Guide 12713020-002-2 Revision D – April 2004
SQUELCH {2048|E1-2048}
Turns the output on or off depending on the current PQL
and the threshold. 0 disables the squelch.
ISOLATE When set to On, validates the signal characteristics
using isolated ones. When set to Off, restores the
isolated condition and returns to normal operation. This
command generates a confirmation request (Yes/No); if
confirmation is No, then no action. For DS1 Output
module.
Level 4 Same as Level 3 operation
Remarks None
Related SETUP, STATUS
Restrictions None
To Next Page
Loading...
Need help?
General
