Symmetricom TimeHub 5500 Reference Guide

097-55501-02 Issue 7 – January, 2005 TimeHub 5500 TL1 Reference Guide 79
Commands
Command Description
Parameter Value Description
<value> NONE No alarm
NONALM Non-alarmed
MINOR Minor alarm
MAJOR Major alarm
FAIL Critical alarm
<event> CLKACTV The indicated Clock card is the synchronization signal
source for all Output cards
CLKCDIN A second Clock card was inserted
CLKDISA The Clock cards are reporting different quality levels
for the same reference input
CLKFAIL A hardware or firmware failure has occurred on the
indicated Clock card
CLKGONE The Management card cannot detect the presence of
the indicated Clock card
CLKNCOM A communications error exists between the Clock
cards
CLKOFFL The indicated Clock card is offline
CLKWARM The Clock card is warming up and the card is not yet
active
ECCRDMM A Connector card exists that is different from the one
specified through the TL1 command. Specified outputs
have been disabled
EPROTMM There are less than two Output Driver cards in the
indicated output pair

Symmetricom TimeHub 5500 Specifications

General

Brand	Symmetricom
Model	TimeHub 5500
Category	Data Loggers
Language	English