7-10 Sysmex XP-300
Sample Analysis
Revised July 2012
Entering from numerical keys dialog
(1) Press the [Sample ID] display column on the Main screen.
The alphanumeric input dialog will appear.
(2) Enter the sample ID.
During the sample ID input, the most right character can be
deleted by pressing the [C] button.
(3) Press the [Ent.] button.
The sample ID is defined, and the status changes to Ready for
starting analysis.
If no sample ID is entered, it will be incremented by 1 for
each new analysis.
[Examples]:
123 → 124
999 → 1000
999999999999999 → 1
12-3 → 12-4
12-999 → 12-000
A999 → A000
If the last character of the sample ID is an alphabetic
character, hyphen or space, it will not be counted up
(incremented) automatically.
To Next Page
Loading...
