Telit Wireless Solutions LN940A11 SERIES - ATSBFS Set and Get SIM Base Status

80591ST10886A Rev.2 Page 159 of 200 2018-07-02
OK
15.2. AT^SBFS Set and Get SIM Base Status
AT^SBFS command is used to set and get SIM base status in module.
Syntax
Type
Command
Possible Return Result
Instruction
Read Command AT^SBFS? SIM base status: Enable/Disable
OK
Write Command AT^SBFS=<mode> Successfully setting SIM base
status as: Enable/Disable
OK
Test Command AT^SBFS=? ^SBFS: (0,1)
OK
Parameter Description
parameter
Value
Instruction
<mode> 0 Disable
1 Enable
Example
AT^SBFS=1
Successfully setting SIM base status as:Enable
OK
AT^SBFS?
SIM base status: Enable
Set SIM base status