Telit Wireless Solutions LN940A11 SERIES - AT+ICF DTE-Modem Character Framing

80591ST10886A Rev.2 Page 23 of 200 2018-07-02
Syntax
Type
Command
Possible Return Result
Instruction
Exec Command AT&E[<value>] OK -
Parameter Description
parameter
Value
Instruction
<value> [0] Serial/DTE rate
1 wireless connection speed
4.10. AT+ICF DTE-Modem Character Framing
This set command defines the asynchronous character framing to be used whenautobauding is disabled
Syntax
Type
Command
Possible Return
Result
Instruction
Test Command AT+ICF=? +ICF: (3),(0-3)
OK
-
Read Command AT+ICF? +ICF:
<value>,<parity>
OK
-
Write Command AT+ICF=[<format>，
[<parity>]]
OK -
Parameter Description
parameter
Value
Instruction