Telit Wireless Solutions LN940A11 SERIES - ATQCPINSTAT Retrieve All PIN

80591ST10886A Rev.2 Page 127 of 200 2018-07-02
Type
Command
Possible Return Result
Instruction
Test Command AT$QCCNMI=?
$QCCNMI: (list of supported
<mode>s),(list of supported
<mt>s),(list of supported
<bm>s),(list of supported
<ds>s),(list of
supported <bfr>s)
Read Command AT$QCCNMI? $QCCNMI:<mode>,<mt>,<bm>,
<ds>,<bfr>
OK
Write Command AT$QCCNMI
=[<mode>[,<mt
>[,<bm>[,<ds>[,<bfr>]]]]]
OK
Parameter Description
parameter
Value
Instruction
<mode> 0 to 2 please refer to the command +CNMI
<mt> 0 to 3
<bm> 0, 2
<ds> 0, 2
<bfr> 0, 1
13.11. AT$QCPINSTAT Retrieve All PIN
AT$QCPINSTAT is used to retrieve all PIN.
Syntax
Type
Command
Possible Return Result
Instruction