Telit Wireless Solutions LN940A11 SERIES - Vendor-Specific Commands

13. VENDOR-SPECIFIC COMMANDS
13.1. AT$QCCLR Clear Mobile Error Log
AT$QCCLR is used to clear mobile error log.
Syntax
Type
Command
Possible Return Result
Instruction
Exec Command AT$QCCLR OK
Parameter Description
parameter
Value
Instruction
Null
13.2. AT&V Display Dumps Configuration Para.
AT&V command is used to display dumps configuration parameters.
Syntax
Type
Command
Possible Return Result
Instruction
Exec Command AT&V
Dumps the status of all AT
parameters applicable to the current
operating mode, including the
single-letter parameters not
otherwise readable. Accepts no
arguments.
Parameter Description
parameter
Value
Instruction