Telit Wireless Solutions LN940A11 SERIES - ATQCDNSP Set Primary DNS IP ADDR

80591ST10886A Rev.2 Page 123 of 200 2018-07-02
Type
Command
Possible Return Result
Instruction
Test Command AT$QCDNSP=? $QCDNSP:
OK
Read Command AT$QCDNSP? $QCDNSP: <address>
OK
Write Command AT$QCDNSP=<address> OK
Parameter Description
parameter
Value
Instruction
<address> <0-254>.<0-254>.<0-
254>.<0-254>
13.5. AT$QCDNSS Set Second DNS IP ADDR
AT$QCDNSS command is used to set secondary DNS IP address.
Syntax
Type
Command
Possible Return Result
Instruction
Test Command AT$ QCDNSS =? $ QCDNSS:
OK
Read Command AT$ QCDNSS? $ QCDNSS: <address>
OK
Write Command
AT$ QCDNSS
=<address>
OK
Parameter Description
parameter
Value
Instruction