Telit Wireless Solutions LN940A11 SERIES - ATQCRMCALL Trigger a Rmnet Call

80591ST10886A Rev.2 Page 139 of 200 2018-07-02
Exec Command AT^SPN ^SPN:<disp_rplmn>,<coding>,<spn
_name>
OK
Parameter Description
parameter
Value
Instruction
<disp_rplmn> 0 RPLMN will not be displayed
1 RPLMN is required to be displayed
9 this field is noneffective, and there 抯 no need for reading
spn_name field again
<coding> 0 GSM 7 bit Default Alphabet
1 USC2 mode
<spn_name> character string, the length will not exceed 16 bytes
13.25. AT$QCRMCALL Trigger A RmNet Call
AT$QCRMCALL is used to trigger a RmNet call via AT command.
Syntax
Type
Command
Possible Return Result
Instruction
Test Command AT$QCRMCALL=? $QCRMCALL: (0-
1),(1,2,3,4,5,6,7,8),(1-3),(1-2),(1-
24),,
OK
Read Command AT$QCRMCALL? OK
Write Command AT $QCRMCALL
=<Action>,
<Instance> [,<IP Type>
[,<Tech Pref >
[,<umts profile
number>
$QCRMCALL:<Instance>, <V4>
$QCRMCALL:<Instance>, <V6>
OK