Telit Wireless Solutions LN940A11 SERIES - 15.33. ATUSBTYPE Query USB Type; AT+GPS EnableDisable GPS

80591ST10886A Rev.2 Page 195 of 200 2018-07-02
AT^BAND_PRI?
^BAND_PRI:1,2,3
OK
Note：Need do at+reset to take effect when do AT^BAND_PRI Write Command
Band priority means, band scan is done based on priority you set by at^band_pri command and
at + reset. But band priority does not guarantee which is the serving band.
15.33. AT^USBTYPE Query USB Type
AT^USBTYPE is used to query USB type is USB3.0 or USB2.0.
Syntax
Type
Command
Possible Return Result
Instruction
Read Command AT^USBTYPE? ^ USBTYPE: <type>
Parameter Description
parameter
Value
Instruction
< type > USB2.0 High speed USB
USB3.0 Super speed USB
Example
AT^USBTYPE?
^USBTYPE: USB2.0
OK
15.34. AT+GPS Enable/Disable GPS
AT+GPS is used to enable/disable GPS.
Syntax
Type
Command
Possible Return Result
Instruction
Read Command AT+GPS? AT+GPS? : GPS is Enable/Disable