Telit Wireless Solutions LN940A11 SERIES - 13.30. ATSYSINFO Inquire Current Message

80591ST10886A Rev.2 Page 143 of 200 2018-07-02
parameter
Value
Instruction
<mode> 2 Automatically select
13 GSM ONLY
14 WCDMA ONLY
15 TDSCDMA ONLY
16 no change
<acqorder> 0 Automatically
1 GSM first, UTRAN second
2 UTRAN first, GSM second
3 No change
<roam> 0 not support
1 can roam
2 No change
<srvdomain> 0 CS_ONLY
1 PS_ONLY
2 CS_PS
3 ANY
4 No change
13.30. AT^SYSINFO Inquire Current Message
AT^SYSINFO is used to inquire current system message.
Syntax
Type
Command
Possible Return Result
Instruction
Exec Command AT^SYSINFO
^SYSINFO: <srv_status>,
<srv_domain>, <roam_status>,
<sys_mode>, <sim_stat>