Telit Wireless Solutions LN940A11 SERIES - AT+CTZU Automatic Time Zone Update

80591ST10886A Rev.2 Page 69 of 200 2018-07-02
Execute
Command
AT+ CLAC …
^VERSION
^BodySaron
^VERINFO
^SBFS
…
OK
-
9.9. AT+CTZU Automatic Time Zone Update
This set command enables and disables automatic time zone update via NITZ.
Read command returns the current settings in the MT.
Test command returns supported on- and off-values.
Syntax
Type
Command
Possible Return
Result
Instruction
Test Command AT+ CTZU =? +CTZU: (0-1)
OK
-
Read Command AT+ CTZU? +CTZU: 1
OK
-
Write Command AT+CTZU=<onoff> OK
Parameter Description
parameter
Value
Instruction
<onoff> 0
Disable automatic time zone update via NITZ (default).
1
Enable automatic time zone update via NITZ.