Telit Wireless Solutions LN940A11 SERIES - AT+CEER Service Reporting Control; AT+CRC Set Cellular Result Codes for Incoming Call Indication

80591ST10886A Rev.2 Page 43 of 200 2018-07-02
Read Command AT+CR? +CR: <mode>
OK
-
Write Command AT+CR=<mode> OK -
Parameter Description
parameter
Value
Instruction
<mode> [0] Disable
1 Enable
6.7. AT+CEER Service Reporting Control
Execution command causes the TA to return the information text <report>, which should offer the user of the
TA an extended report of the reason.
Syntax
Type
Command
Possible Return Result
Instruction
Test Command AT+CEER=? OK -
Exec Command AT+CEER? +CEER: <report>
OK
-
Parameter Description
parameter
Value
Instruction
<report> - Wrong information which is possibly occurred.
6.8. AT+CRC Set Cellular Result Codes for Incoming Call Indication
AT+CRC controls whether or not to use the extended format of incoming call indication.
<mode>=1 may lead to connection failure, if the application waits for default result code/URC.