Telit Wireless Solutions LN940A11 SERIES - ATQCMRUE Edit MRU Database

80591ST10886A Rev.2 Page 134 of 200 2018-07-02
Write Command AT$QCDEFPROF=
< family >
< subs id >
< profile id >
OK
Parameter Description
parameter
Value
Instruction
< family > 1 to 16
< subs id > 1 to 3 For non-DSDS target SUBS ID is limited to 1.
< profile id > 1 to 16
13.19. AT$QCMRUE Edit MRU Database
AT$QCMRUE is used to edit MRU database.
Syntax
Type
Command
Possible Return Result
Instruction
Test Command AT$QCMRUE=? $QCMRUE: (list of support <index>,
<rat>,<band>,<channel>)
Read Command AT$QCMRUE? $QCMRUE: <index>
,<rat>,<band>,<channel>
OK
Write Command AT $QCMRUE=<index>
,<rat>,<band>,<channel>
or <PLMN>
OK
Parameter Description
parameter
Value
Instruction
<index> 0 to 11