Telit Wireless Solutions LN940A11 SERIES - AT+CMGD Delete Message

80591ST10886A Rev.2 Page 115 of 200 2018-07-02
> Rose
+CMGW: 0
OK
AT+CMGL=”all”
+CMGL: 0,”STO UNSENT”,”18576408172”,,
Rose
OK
AT+CMSS=0
+CMSS: 36
OK
Lists all message
Send a message from memory index 0
12.13. AT+CMGD Delete Message
The command is used to delete message from preferred message storage <mem1> location <index>. If
<delflag> is present and not set to 0 then the ME shall ignore <index> and follow the rules for <delflag> shown
below.
Syntax
Type
Command
Possible Return Result
Instruction
Test Command AT+CMGD=? +CMGD0-255),(0-4)
OK
-
Write Command
AT+CMGD=<index>[,<del
flag>]
OK
Parameter Description
parameter
Value
Instruction
<index> -
Integer type; value in the range of location numbers
supported by the associated memory and start with zero
<delflag> 0 If 0 or value omitted, delete message specified in <index>.