Telit Wireless Solutions LN940A11 SERIES - ATH Disconnect Existing Data Connection; Itu-T V.25 Ter Call Control Commands

80591ST10886A Rev.2 Page 54 of 200 2018-07-02
7. ITU-T V.25TER CALL CONTROL
COMMANDS
7.1. ATH Disconnect Existing Data Connection
ATH disconnects circuit switched data calls. For voice calls use AT+CHUP or AT^SHUP.
Syntax
Type
Command
Possible Return Result
Instruction
Exec Command ATH[<n>] OK -
Parameter Description
parameter
Value
Instruction
<n> [0] Disconnect from line and terminate data call.